20FT Degelman Pro-TillNarrabri, NSW 2390

Description

The Ultimate in High Productivity Seed Bed Preparation Designed to shred and blend heavy residue, open up soils, level ruts, destroy clods and produce an absolutely perfect seed bed in wet or dry conditions - all at a 16 kph (10 mph) working speed.
The Pro-Till's seed bed enhances yield through better soil condition, nutrient activity and moisture profile. It features floating Self-Contour Technology, flawless rock protection and a very heavy frame and componentry.
Cultivate over 10 MPH
The Pro-Till shreds residue at speeds over 10 mph while ensuring uniform distribution of residue, critical for no-till rotations. Problems such as poor residue distribution, uneven emergence, delayed emergence, hair pinning, erosion and seeder/planter plugging are eliminated with the Pro-Till.
Fields can be hampered by tough heavy residue from crops like flax, peas, sunflowers, barley, wheat, soybeans, and BT corn. This is no longer a problem. Pro-Till is ideally pulled fast- 10 to 14 mph. Our patent pending combination of independent disc arms, with small diameter shallow discs, motion dampening rubber suspension, sturdy frame and cutting edge consolidating rollers allow this tillage tool to slice through residue as never seen before. Pro-Till will cut, weed, throw and mix soils at incredible speeds and usually in one pass. This is a true residue-killing machine.
Wet or Dry - Work in the Most Challenging Conditions
A Pro-Till cultivator has the unique ability to cultivate and warm the soil during cold wet conditions when all other forms of tillage plug and fail.
In the midst of a long wet spring, getting seed in the ground to allow adequate time for the growing season is critical. Heavy cold soils need to be black and warm for ideal germination conditions. In as little as one day and after one pass, frigid heavy residue soil is cut, turned, mixed, reactivated, warmed, topically dried and ready for planting/seeding. Pro-Till in the spring can mean the difference between success and failure.
Prepare Your Seedbed Fast
Seedbed preparation is the very foundation for a strong growing season. Ideally, robust biological activity is enhanced through the accepting, storing and transmitting of water, gases and nutrients. Pro-Till® high performance cultivation levels ruts, crushes clods produces an absolutely perfect seed bed. Pro-Till® is your single tool for tillage.
Level Ruts, Instantly
Pro-Till is your single spring and fall solution to tillage needs. Pro-Till is ideal for field finishing, leveling and filling ruts and tracks in the spring or fall. Today’s heavy tractors, trucks, sprayers, grain carts and center-fill planters can produce deep compacted ruts that seriously restrict roots growing space, inhibiting yields and potentially damaging expensive equipment.
The Degelman Pro-Till compact disc cultivator has just the right amount of dirt carrying capacity to level almost any field. One or two additional cross direction passes may be required to completely level and fill the most severe ruts.
Oversized, Over Built, Bulletproof Frame
Degelman designers are passionate about getting it right. Farm tools with the least amount of moving parts will simply last longer. Degelman is renowned for building overbuilt and under complicated equipment. Less is always more.
Floating Self-Contour Technology
Degelman’s floating section design allows the Pro-Till to “Self-Contour” as it follows the curvature of the varying terrain. The independent wing sections allow horizontal contouring for steep inclines or downward slopes up to 6 degrees. The contour angles between the front frame and rear center section also provide excellent front to back flexibility to help traverse demanding hills and valleys. This floating, self-contouring design coupled with the Pro-Till independent discs help produce a flawless, uniform field.
Weight is Inherent in the Overbuilt Frame
Weight equals penetration. Without it, the discs will ride out of the ground if soil conditions are too hard. In order for the discs to work well in hard soil and heavy trash conditions an adequate downward force is required. Other machines require extra weight stacks, but the 23,000 lb. Pro-Till® cultivator carries this weight in the frame where it should be.
State of the Art Software
We start with top-of-the-line 3D software and run our equipment designs through multiple what-if scenarios. Then we put the designs into our Finite Element Analysis (FEA) engineering analysis software. It allows us to simulate the loads our design and mounting hardware will encounter before we ever get to the building and testing stages. Our engineers run a variety of the toughest simulations possible-heavy loads, hard angles and high lifts to find out ahead of time of any problem spots. Then, and only then, do we move to making a prototype to test in the field.
Maximum Trash Flow
The discs have a shallow face to eliminate compaction layers and the high tensile strength steel arms provide maximum flow through with three times the spring back of normal mild steel.
Traditional disc gangs are severely limited by their ability to process residue and level properly. They can plug very quickly during wet seasons, are limited in speed, cannot resist rocks and due to their deeper tillage have a tendency to bring clay soil to the surface.
Improved Roller Trash Flow
With fewer angles and a larger span between the roller and frame Pro-Till 20/26 allows ample room for trash to exit in between.
Flawless Rock Protection
Pro-Till® disc arms are preloaded using four natural rubber spring elements that allow the disc to skate over severe stones, yet perfectly follow the contours of the land. When a stone is encountered, the rubber elements compress automatically dampening the impact and providing protection while immediately springing the disc back into operation.

Call now to organise a booking 0437 47..... 0438 00.....

Attachment

Title	20FT Degelman Pro-Till
Ref #	DZ22771

1	Narrabri NSW 2390
2	Moree NSW 2400
3	Wagga wagga NSW 2650
4	Deniliquin NSW 2710
5	Coonamble NSW 2829
6	Dubbo NSW 2830
7	Walgett NSW 2832
8	Hodgson vale QLD 4352
9	Goondiwindi QLD 4390
10	Dalby QLD 4405
11	Roma QLD 4455
12	St george QLD 4487
13	Emerald QLD 4720

View hire fleet

Tiger 4MT Ho...

Tiger 6MT Ho...

8m Degelman...

6m Degelman...

View our work

View items for sale

40FT Degelma...

33FT Degelma...

26FT Degelma...

20FT Degelma...

Company Details

SawleyCo Pty Ltd
Head Office
Hodgson Vale, QLD 4352
Australia
View Website

Company Description

SawleyCo is a specialised agricultural services company with generations of farming and contracting experience. Our sole focus is to help farmers improve their productivity. We strive to bring solutions that increase revenue, decrease costs and improve asset utilisation.
Our business culture is founded on 3 key principles:

Excellent customer relationships built on outstanding service
A continually evolving suite of advanced products and services that deliver real productivity improvement
A great team

SawleyCo delivers productivity improvement through 4 offerings:

Equipment hire where the farmer can control the operation but does not want to purchase a machine
Contracting where the farmer wants a full service solution
Sales where the farmer wants to own the machine
Parts where the farmer wants quality components at market leading value

Hiring specialised tillage equipment to farmers has large potential with initial machines performing very well
Modern, sophisticated tillage equipment brings real productivity improvement to farmers through decreasing seed-bed preparation costs and enhancing yield
This equipment is expensive however and individual farmers often cannot justify purchasing it due to limited utilisation
Hiring this equipment solves this problem for the farmer with the hire cost being less than the holding and operating cost of the machine